Contattare il Fornitore

Ms. Emily Cui
Lasciate un messaggioInformazioni basilari
Modello: SYS40VDC12000W
Descrizione del prodotto
Sistema di sorgente DC è un alimentatore CC programmabile a uscita singola che fornisce un'alta densità di potenza e un'uscita CC stabile. Con la capacità di test di tensione e corrente incorporata, il sistema di sorgenti CC può soddisfare diversi tipi di applicazioni di alimentazione CC.
Il protocollo SCPI viene fornito per il controllo tramite la corrente continua della singola uscita e dell'interfaccia remota con l' alimentazione programmabile di Smps . L'unità singola degli alimentatori CC di tipo 2U collegati in serie o in parallelo può facilmente raggiungere l'estensione di tensione, corrente e potenza. Questo sistema a rack 6U è fino a 12 kW con tensione di uscita fino a 120 V quando collegato in serie e corrente di uscita fino a 360 A per la connessione parallela. È anche possibile l' alimentazione a 9 volt cc . .
Area di applicazione :
Questa serie è applicabile a più settori come i settori elettrico, dell'illuminazione e dell'aviazione e potrebbe essere applicata anche al test di produzione aziendale.
Caratteristiche del prodotto:
● Con accurate capacità di misurazione della tensione e della corrente.
● Manopola codificata, tastiera multifunzione.
● Interfacce di comunicazione standard RS232 / RS485 / USB / LAN, GPIB è opzionale.
● Compensazione della caduta di tensione della linea di telerilevamento.
● Fornisce la funzione di modifica della forma d'onda di LIST.
● Utilizzare il protocollo di comunicazione Standard Commands for Programmable Instrumentation (SCPI).
● Hanno ottenuto la certificazione CE.
Specifica tecnica:
ltem | MODEL | SYS40VDC12000W | |
INPUT | |||
1 | Voltage | 190~265VAC | |
2 | Frequency | 47~63Hz | |
3 | Phase | 3 Phase,4Wire+Groud/Y Connect | |
4 | Max.Current | 75A | |
5 | Input Power Max | 15kW | |
6 |
Power Factor at 220VAC Input ,Full Load |
0.98 Min. Active PFC | |
7 | Efficiency | >88% Max @Full Load and Units=4kW Model | |
OUTNPUT (Parallel Mode) | |||
8 | Output Voltage | 0~40V | |
9 | Output Current | 0~360A | |
10 | Output Power | 12kW Max | |
11 | Load Regulation | Voltage | 120mV |
12 | Current | 0.36A | |
13 | Line Regulation | Voltage | 0.02%F.S.+30mV |
14 | Current | 0.02%F.S.+15mA | |
15 | Voltage Setting | Range | 0~40V |
16 | Resolution | 0.1mV | |
17 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
18 | Current Setting | Range | 0~360A |
19 | Resolution | 10mA | |
20 | Accuracy | 0.1%+0.10%F.S | |
21 | Ripple | Voltage | 80mVp-p/12mVrms |
22 | Current | 225mA(Full Range),30mA(TYP Value) | |
MEASUREMENT (Parallel Mode) | |||
23 | Voltage Setting | Range | 0~40V |
24 | Resolution | 0.1mV | |
25 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc |
|
26 | Current Setting | Range | 0~360A |
27 | Resolution | 10mA | |
28 | Accuracy | 0.1%+0.10%F.S | |
OUTNPUT (Series Mode) | |||
29 | Output Voltage | 0~120V | |
30 | Output Current | 0~120A | |
31 | Output Power | 12kW Max | |
32 | Load Regulation | Voltage | 120mV |
33 | Current | 0.36A | |
34 | Line Regulation | Voltage | 0.02%F.S.+30mV |
35 | Current | 0.02%F.S.+15mA | |
36 | Voltage Setting | Range | 0~120V |
37 | Resolution | 10mV | |
38 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
39 | Current Setting | Range | 0~120A |
40 | Resolution | 1mA | |
41 | Accuracy | 0.1%+0.10%F.S | |
42 | Ripple | Voltage | 60mVp-p/9mVrms |
43 | Current | 300mA(Full Range),40mA(TYP Value) | |
MEASUREMENT (Series Mode) | |||
44 | Voltage Setting | Range | 0~120V |
45 | Resolution | 10mV | |
46 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput
Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
47 | Current Setting | Range | 0~120A |
48 | Resolution | 1mA | |
49 | Accuracy | 0.1%+0.10%F.S | |
Extra Function | |||
50 | Remote Sense | Range | 5V(DC), Max. Total power less than rated power |
51 | Comm. Respondence. | 50ms | |
52 | Graphic Display | VFD | |
53 | Operation Key Feature | Soft key,Numberic key,Rotary Knob | |
54 | Rack mount Handles | Yes | |
55 | FAN | Temperature Control | |
56 | Protection Circuits | OCP, OVP, OPP, OTP,FAN | |
57 | Interface | USB, RS485, RS232, LAN(Standard); GPIB(Option) | |
Remote Control Input/Output signal characteristics | |||
58 | Remote Input signal | Not Support | |
59 | Remote output signal | Not Support | |
Environmental | |||
60 | Operating Temperature | 0°C~40°C | |
61 | Storage Temperature | -20°C~70°C | |
62 | Altitude | 2000m | |
63 | Relative Humidity | 10%~90%, non-condensing | |
64 | Temperature Coefficient | 100ppm/°C at Voltage, 300ppm/°C at Current | |
Mechanical | |||
65 | Dimensions(W*H*D) | 600.0*736.0*700.0 mm | |
66 | Package Dimensions(W*H*D) | 720.0*910.0*820.0 mm | |
67 | Unit Net Weight | 54kg+15kg*N(REF) | |
68 | Accessories Weight | 0.4kg | |
69 | Shipping Weight | 94kg+15kg*N(REF) | |
Regulatory Compliance | |||
70 | CE Mark | Installation Overvltage Category II;Class II equipment;indoor use only. |
* FS rappresenta il valore massimo del campo di uscita.
* N indica il numero di unità di alimentazione installate e N è maggiore di 1.
Elenco prodotti : DC Source System > 40 V DC Source System